- This topic has 4 replies, 2 voices, and was last updated 14 years, 2 months ago by
.
-
Posts
-
I am having a problem with a Bosch washer dryer Enr WVD245S3gb/01 If I set the dryer prog to high heat 1 hour after anything from from nine to twenty mins it just freezes up!
I have tested fill,empty,dryer heater & dryer fan whilst on the dry cycle and they are all operating as they should.
The display will show that one hour has been selected and that say 51 mins are left BUT it is doing nothing. If I reset it does the same again but not always after the same amount of time.
The only led lit is the start one (No option leds lit) It will allow me to open the door after a couple of minutes.
The washing side of this machine works perfectly
ANY ideas PLEASE?
Re: BOSCH WVD245S3gb/01 dryer fault
Sounds like some self-resetting toc is opening somewhere. Have you checked airflow and looked for blocked condenser?
Mike.Re: BOSCH WVD245S3gb/01 dryer fault
Mike,
Yep checked for blockages ….all pretty clean to be honest! I just tried it again and strangely it went past the nine minutes i.e. 51 mins left from the hour set, in fact it had counted down to 48 mins left BUT went back a few mins later and it had stopped again but was showing 51 mins left!?
CONFUSED…….thanx for the reply any other ideas?Re: BOSCH WVD245S3gb/01 dryer fault
Searched for Bosch drying stops – TTE’s forum only http://www.ukwhitegoods.co.uk/forumsphpbb3/search.php
It ignored Bosch of course but there looks like some info in there.
Mike.
- You must be logged in to reply to this topic.