AEG 16830 drain pump hose

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › AEG 16830 drain pump hose

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 16, 2012 at 6:19 pm #67398
    BillBrum
    Participant

    Hello all

    The small-bore pipe or hose at the front bottom right of my washer-dryer has become detached while the drain pump was being checked. From the marks on the pipe, it looks like it was held on with a sprung hose clamp. I take it I will have to put the machine on its back and remove the plastic access cover, but my question is, how easy will it be to get the hose back on?

    Any advice gratefully received.

    Cheers

    January 19, 2012 at 9:43 am #367343
    Seamy
    Participant

    Re: AEG 16830 drain pump hose

    quite easy, remove back panel after switching power off first of course, you can see everything from there

    January 21, 2012 at 5:07 pm #367344
    BillBrum
    Participant

    Re: AEG 16830 drain pump hose

    Just completed the job. In fact, it was accessed via the removable plastic cover underneath the machine. I don’t think the back comes off at all.

    January 27, 2012 at 8:24 pm #367345
    Seamy
    Participant

    Re: AEG 16830 drain pump hose

    Back half deffo comes off, if you look theres hidden screws at bottom of both sides, take top off, screws on top to be removed & ones at back at the bottom, whole casing of machine splits in half allowing access.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.