Hotpoint WDD960 F.02 Errors

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WDD960 F.02 Errors

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 17, 2012 at 7:04 pm #67416
    squadman
    Participant

    Got one of these that has a fault of Error Code F.02 evidently Motor Jammed, Tacho or Motor Triac Failure.

    Have checked motor and Tacho all of which seem fine, machine washes and spins at full speed, Have removed motor plug and motor plug to PCB and tightend connections. Still getting this fault, anyone have any ideas or seen this before ?

    Any ideas much appreciated ! 🙂

    January 17, 2012 at 7:25 pm #367385
    iadom
    Moderator

    Re: Hotpoint WDD960 F.02 Errors

    I had a couple that were due to broken wires in motor plug, had to give them a good tug to find though. Sounds as though the PCB needs a trip to EMW to me. 🙁

    January 18, 2012 at 12:05 am #367386
    squadman
    Participant

    Re: Hotpoint WDD960 F.02 Errors

    Thanks iadom, thats what I was considering, I was wondering if anyone had had a F.02 Error where in fact the motor was the culprit ?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.