ELECTROLUX EW1000I

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ELECTROLUX EW1000I

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 17, 2012 at 7:37 pm #67417
    rickard
    Participant

    Went to this built in washer today , when you select spin it tumbles normal and then spins for 10 seconds and stops, it then tries this again and after this time the timer will advance to the finish and shut off, i have checked brushes and tacho all ok it has got to be either motor or timer the one with the pcb on top of the timer, but i dont know which one to go for any advise would be helpful. 914880026/01. thanks

    January 17, 2012 at 9:09 pm #367387
    spimps
    Participant

    Re: ELECTROLUX EW1000I

    I have changed a couple of timers in the past,if testing when empty and it does this,providing the tacho is not lose or damaged then timer is ikely.
    Expensive item though as I remember.

    January 17, 2012 at 10:10 pm #367388
    aqualectric
    Participant

    Re: ELECTROLUX EW1000I

    Can be an earth leak on the armature, excess carbon on the armature or timer fault. EMW do these timers for a reasonable price.

    Steve.

    January 18, 2012 at 7:10 pm #367389
    leavemetogetonwithit
    Participant

    Re: ELECTROLUX EW1000I

    Common fault with these timers. You need number off timer label (e.g. 514296 is a common one) Then you can ring EMW and get them to send you one on a use or return (small charge) basis.
    Mike.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.