Whirlpool pump?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Whirlpool pump?

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • January 21, 2012 at 12:31 pm #67495
    iadom
    Moderator

    Is a 481231028144 the correct pump, for an AWO/D 4505 washer ?

    Jim.

    January 21, 2012 at 1:13 pm #367585
    don
    Moderator

    Re: Whirlpool pump?

    Afternoon Jim

    12nc would be good 8592332????? to be sure.

    Don

    Oldham V City this afternoon 8)

    January 21, 2012 at 3:04 pm #367586
    johnmac11
    Participant

    Re: Whirlpool pump?

    Hi Jim,

    9 different versions of this machine, 8 of them have part number 480111101014 and the odd one out which has a 12nc of 859233215004 has part number 480111100786

    John

    January 21, 2012 at 3:43 pm #367587
    iadom
    Moderator

    Re: Whirlpool pump?

    😳 859233215008. 🙂

    Yeh, City have been a bit of a bogy side recently, just hoping the howling gales sweeping round Ice Station Zebra will put them off. 😀

    Thats quite an expensive pump John, the one on the machine is just noisy, didn’t pull it out to have a look at it, is there a pump body that will fit it?

    Jim.

    January 21, 2012 at 5:01 pm #367588
    Allsorts
    Participant

    Re: Whirlpool pump?

    These are the two part numbers I’m getting Jim.

    480111101014
    481236018559

    George

    January 21, 2012 at 6:17 pm #367589
    johnmac11
    Participant

    Re: Whirlpool pump?

    481236018559 has been superseded by 480111101014

    I have never tried fitting a pattern version to the back of the pump housing but I don’t see any problems in doing so as the electrical side of the pump looks like all the rest out there and is usually held on with 3 screws.

    John

    January 21, 2012 at 7:32 pm #367590
    iadom
    Moderator

    Re: Whirlpool pump?

    Allsorts wrote:These are the two part numbers I’m getting Jim.

    480111101014
    481236018559

    Yep both around £30 ish. I am sure I have fitted a pump body from a gen Hotpoint pump on these in the not to distant past.

    January 21, 2012 at 8:39 pm #367591
    Allsorts
    Participant

    Re: Whirlpool pump?

    It might have been this one Jim C00144997

    January 21, 2012 at 8:59 pm #367592
    iadom
    Moderator

    Re: Whirlpool pump?

    I do carry several different Hotpoint pumps so will pop back and open the beast up, was a bit pushed this morning and as they had just mopped the large tiled floor with bleach due to a doggy mishap I had a quick listen, made my diagnosis and left. 😉

    Jim.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.