- This topic has 3 replies, 2 voices, and was last updated 14 years, 2 months ago by
.
-
Posts
-
Does any one have the part number for drum bearing kit and can the bearing housing be removed without taking the complete tub out, the back panel is the small pear shaped type so not much room to remove housing it looks very tight
Re: bosch washer/dryer wvt1260gb/01
I did ask at my local major spares supplier who shall be namless but they couldnt find them on the bosch website only the housing came up i was told over the phone
Re: bosch washer/dryer wvt1260gb/01
looks like you have to buy complete housing incl bearings 85+vat
Re: bosch washer/dryer wvt1260gb/01
IIRC , you can do it in-situ by having the machine laid on its front. This gives you JUST enough room to wiggle the bearing cross out once the bolts have been removed ……the fun really starts when you start trying to put the cross back on !!!
Tip – order some new bolts too as the new bearing cross will need new threads cutting with the bolts. Best to do this before fitting .
- You must be logged in to reply to this topic.