Siemens WDI 1440GB/04

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens WDI 1440GB/04

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 25, 2012 at 3:25 pm #67574
    ChrisR
    Participant

    Hi lads
    Can anybody tell me wether the E10 fault on
    this machine
    likely to be motor or pcb
    Thanks
    Chris

    January 25, 2012 at 4:01 pm #367836
    Martin
    Participant

    Re: Siemens WDI 1440GB/04

    It’s one of the Smeg heaps of junk

    From: Known Error Codes (page 5)

    E01 = Aquastop
    E04 = Wash NTC
    E05 = No water in
    E06 = No water out
    E10 = Motor fault
    E14 = Dryer NTC

    HTH? 😀

    January 25, 2012 at 7:56 pm #367837
    ChrisR
    Participant

    Re: Siemens WDI 1440GB/04

    Sorry Martin,I did`nt mean that.
    Is the cause of the E10 code likely to be the motor or the board

    January 26, 2012 at 8:51 am #367838
    Martin
    Participant

    Re: Siemens WDI 1440GB/04

    Motor faulty is the most likely Chris. If the machine suffers from slow (blocked) drain out probs the motor’s on these overheat and burn out easily. Total crap if you ask me, I hesitate to take them on these days…… :rolls:

    January 26, 2012 at 10:08 am #367839
    ChrisR
    Participant

    Re: Siemens WDI 1440GB/04

    Thanks Martin

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.