slimline bosch d/w srs45e38gb/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › slimline bosch d/w srs45e38gb/01

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • January 25, 2012 at 6:40 pm #67581
    hilly
    Participant

    this machine fills but dosent shut of filling when full, the float lifts up to drain it back to level the it fills again, it just keeps repeating this but never starts to wash. its all spotlessly clean inside, my first thought was the impellor jug which i replaced but no joy, its still doing the same? no aquastop on this mod. heeeelllpp! (please)


    cheers paul

    January 25, 2012 at 7:25 pm #367867
    timdowning
    Participant

    Re: slimline bosch d/w srs45e38gb/01

    Im sure some people have suggested really low or high water pressure can give this fault. Ive had a full size version of this machine where it was the module at fault.

    January 25, 2012 at 11:59 pm #367868
    leavemetogetonwithit
    Participant

    Re: slimline bosch d/w srs45e38gb/01

    Signal from impellor jug not arriving at module (loom / connector dodgy)? Or module with mysterious fault.
    Mike.

    January 26, 2012 at 8:46 am #367869
    Martin
    Participant

    Re: slimline bosch d/w srs45e38gb/01

    Yep….ditto Tim & Mike’s comments.:tup:

    January 26, 2012 at 8:02 pm #367870
    nomadPaul
    Participant

    Re: slimline bosch d/w srs45e38gb/01

    And make sure you fitted the new impellor jug the right way ! 🙂

    January 31, 2012 at 8:12 am #367871
    hilly
    Participant

    Re: slimline bosch d/w srs45e38gb/01

    cheers, the impellor jug can only go on one way its one thats attatched to the bottom of the fill tank, looking like module then.
    thanks again.

    January 31, 2012 at 8:49 am #367872
    leavemetogetonwithit
    Participant

    Re: slimline bosch d/w srs45e38gb/01

    So you noted the arrow on it?
    Mike.

    February 3, 2012 at 6:02 pm #367873
    hilly
    Participant

    Re: slimline bosch d/w srs45e38gb/01

    leavemetogetonwithit wrote:So you noted the arrow on it?
    Mike.

    this one can only go one way, it attatches to the bottom of the plastic metering tank held on with a metal clip, its not the circular one that fits in the base connected with the hoses,

    thanks tho 😉

    February 3, 2012 at 6:23 pm #367874
    leavemetogetonwithit
    Participant

    Re: slimline bosch d/w srs45e38gb/01

    Oh, not seen one of those before! Always something new to learn in this game. Does this part contain the reed switch only or the impellor/magnet assy too? If switch only, and impellor is in metering tank, could be it needs new metering tank? Or could be that new part is faulty???
    Mike.

    February 4, 2012 at 10:17 am #367875
    hilly
    Participant

    Re: slimline bosch d/w srs45e38gb/01

    its complete, works just like the other style, its part no 607138, every day is a school day 😉

    February 4, 2012 at 2:12 pm #367876
    leavemetogetonwithit
    Participant

    Re: slimline bosch d/w srs45e38gb/01

    I would connect my 4.5v test lamp (w incandescent bulb) across the terminals coming from the IJ to the module and see if it flashes rapidly with the water turned down to low flow. That would tell you if all was OK with the thing.
    Mike.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.