hoover hnf71683d-80

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hoover hnf71683d-80

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 25, 2012 at 9:03 pm #67582
    mikehha
    Participant

    This washing m/c flashed e03 once now it dosn`t pump no power to pump I have put it down as a board as I know these are prone to pump triacks blowing up anything else I should be looking at thanks mike

    January 25, 2012 at 10:30 pm #367877
    iadom
    Moderator

    Re: hoover hnf71683d-80

    Check for leaks onto the pump, the soap inlet hose to drum sealant often breaks away and leaks onto pump.

    Have a very good look at the wiring connection plug to the pump, it often appears OK but will have shorted across inside, nearly always takes the PCB out.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.