WML error codes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WML error codes

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • January 26, 2012 at 12:22 pm #67596
    roy1
    Participant

    On error code sheet it reads bottom to top with 5 lights with door lock number 1 but the wml has 6 vertical lights door,end,drain,spin,rinse,& wash do you miss out end light?
    Roy.

    January 26, 2012 at 3:48 pm #367914
    don
    Moderator

    Re: WML error codes

    Hi Roy

    Jim’s post here in the known error codes thread should help 😉

    Don

    January 26, 2012 at 7:56 pm #367915
    roy1
    Participant

    Re: WML error codes

    Trouble is that only shows 5 leds, with door lock number 1 & wash led number 5 led when the wash led is actually number 6
    Roy

    January 26, 2012 at 10:00 pm #367916
    iadom
    Moderator

    Re: WML error codes

    No it isn’t, the top LED ( No 6) is the prewash light. Check the fill valves if light 6 is flashing. 😉

    Rinse & Spin is just one led so you have listed five in you first post, missing out the top ‘prewash’ led.

    Jim.

    January 27, 2012 at 8:30 am #367917
    Martin
    Participant

    Re: WML error codes

    roy1 didn’t make mention of exactly what WML he was referring too sadly. But as an example a WML540 doesn’t have a Pre-wash LED 😕

    1 = Door Locked
    2 = End
    3 = Pump Out
    4 = Spin
    5 = Rinse
    6 = Wash

    January 27, 2012 at 9:59 am #367918
    iadom
    Moderator

    Re: WML error codes

    I have just looked through all of the varients of the WML540 that I can find and they all have a prewash light.

    Thats WML540,K,C,R,CA & RA.

    January 27, 2012 at 12:36 pm #367919
    roy1
    Participant

    Re: WML error codes

    The WML520 OR WML540 have wash,rinse, spin, drain, end & door lock.
    Roy

    January 27, 2012 at 12:47 pm #367920
    Martin
    Participant

    Re: WML error codes

    Typical of the oddities that is the Indesit Company in that (and I concur with Jim on this) the manual shows a Prewash LED but the machines and user manual don’t (as roy1 has discovered).

    Needless to say the top LED is irrelavent to establishing an error code of these italiano spazzatura. 😈

    January 27, 2012 at 4:55 pm #367921
    roy1
    Participant

    Re: WML error codes

    Thanks for clearing that up martin.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.