Neff V5340X2GB/06 Open fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff V5340X2GB/06 Open fault

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 31, 2012 at 4:36 pm #67669
    Auldyn
    Participant

    Integrated machine as above display shows open when cycle is started and machine will not progress through cycle.
    Interlock is ok (has been changed) door locks ok, pressure switch ok, no visible damage to control board inlet valves ok has anyone any idea what else could cause this fault.
    Thank’s

    Paul

    Auldyn Electrics

    January 31, 2012 at 4:51 pm #368152
    Martin
    Participant

    Re: Neff V5340X2GB/06 Open fault

    Not a clue what the fault can be, sorry. But having selected say Cottons 30, try pressing and holding the Start/Stop button for 8 seconds or so until 0000 appears on the display. The release button and turn selector off.

    Switch on again to see if that clears it? 💡

    January 31, 2012 at 5:28 pm #368153
    Auldyn
    Participant

    Re: Neff V5340X2GB/06 Open fault

    Hi
    Phoned customer and tried this but no success start button light flashes, still stumped with this one dont want to order a new control board if something else could be causing it

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.