Hotpoint CTD40G Dryer no go

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint CTD40G Dryer no go

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 1, 2012 at 9:01 am #67679
    Latham63
    Participant

    The drum bearing had failed + no power to facia board.Fixed bearing. Live to power board. No power seems to be going from main pcb to facia pcb? Have new board(not programed). Have tried installing,still nothing.Have heard there is need for lap top or smart card to set up program? Rest of machine looks ok.

    February 1, 2012 at 9:06 am #368171
    Criscold
    Participant

    Re: Hotpoint TCE7127W Dryer no go

    Are you sure the details are correct as TCE7127W is Zanussi

    Colin

    February 1, 2012 at 9:17 am #368172
    Criscold
    Participant

    Re: Hotpoint CTD40G Dryer no go

    Have you checked that the start button is not broken and that the small switches on the facia board are not damaged, I’ve had this a couple of times

    Colin

    February 1, 2012 at 11:23 am #368173
    iadom
    Moderator

    Re: Hotpoint CTD40G Dryer no go

    Machine will be totally dead if the rear stat is O/C on later models.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.