- This topic has 4 replies, 3 voices, and was last updated 14 years, 2 months ago by
.
-
Posts
-
Model 44AW.
DIY expert thought he would change his own element, found the back difficult to get off so gave it a good yank. Pulled most of the wires from the terminal block and element. 👿
Using some old scribbled notes from previous White Knight dryers I think I have got them all back in the correct positions but would like to be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain.
On the element I have blue to TOC on the double terminal
Red to harness on the inner single terminal
Black to harness and black to stat on the outer terminal.On the terminal block I have brown/white to live.
Black/white to neutral.
Purple and blue to TOC.
Blue/White and black to stat.Can anyone confirm this is correct?
TIA.
Jim.
Re: White Knight wiring?
Hi Jim,
I have a 44aw in the shop. If you give me your email I will send you a photo of the wiring for you to be sure.
Re: White Knight wiring?
I think I am sorted, bazza500 has given me the connections, looks as though I have got them all correct. 8)
The irony of it is that the element was perfect, he only needed to press the red button. :rolls:
Re: White Knight wiring?
Thanks for the wiring diagrams etc Mike, its been my lot recently to have wiring diagram problems, the ones you have sent have no mention of any connections to terminal 3 on the terminal block but the info bazza500 sent me and my own observations have two wires going to T3 on the block. 😕
Jim.
- You must be logged in to reply to this topic.