Maytag MTD09 WD Condenser dryer F04 error

This topic has 6 replies, 3 voices, and was last updated 14 years, 2 months ago by applianceofscience.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
February 2, 2012 at 9:53 am #67699

applianceofscience
Participant

Anyone got any ideas on the F04 error for the Maytag MTD09WD

February 2, 2012 at 10:06 am #368219

admin
Keymaster

Maytag MTD09 WD Condenser dryer F04 error

Hi

Should be the same as the ISE 10 drier fault codes if it’s the ASKO one

Bryan

February 2, 2012 at 12:15 pm #368220

eastlmark
Moderator

Re: Maytag MTD09 WD Condenser dryer F04 error

its blocked air flow, check the fan (easily accessed under the front panel, condenser (if not a vented one) and wash the filter in the door, its very fine and gets blocked by users just scraping the fluff off

February 2, 2012 at 2:42 pm #368221

applianceofscience
Participant

Re: Maytag MTD09 WD Condenser dryer F04 error

Hiya
Done all that, its all clear and the condenser is dry and clean
The error code is still showing and wont clear down

I think If the code can be cleared down it will probably work?

Paul

February 2, 2012 at 10:34 pm #368222

eastlmark
Moderator

Re: Maytag MTD09 WD Condenser dryer F04 error

is there another model number on there such as TD20?

February 3, 2012 at 10:15 am #368223

applianceofscience
Participant

Re: Maytag MTD09 WD Condenser dryer F04 error

No Im afraid not
What they have done it covered it in sensors, I have found three so far
A magnetic door sensor and two others within the body
All new to me and Maytag/Whirlpool wont help

Paul

February 3, 2012 at 12:17 pm #368224

eastlmark
Moderator

Re: Maytag MTD09 WD Condenser dryer F04 error

will probably have a service manual but need the Asko model number, I am sure it is on the rating plate. eg TD25.2
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.