- This topic has 4 replies, 2 voices, and was last updated 14 years, 1 month ago by
.
-
Posts
-
Hi All,
Problem with this one is the “End” light is flashing and when pressing “Start”, nothing.
Set the Door lock manually to closed and still nothing although the “Door Locked” light is now ON.
Any advice appreciated.
TonyRe: Hoover HNWL6136
As you are probably aware an error code is shown by the ‘Start’ LED and the first ‘Option Button’ LED flashing simultaneously. Counting the flashes represents the relevant code. (see Known Error Codes thread)
If that’s not happening then you will need to poke around and check everything for a potential fault, not forgetting to remove and inspect the Core board whilst you’re at it.! 🙂
Re: Hoover HNWL6136
bigkid wrote:Thanks Martin, looks like a job for EMD to eliminate the PCB.
Dunno who EMD are but faults with PCB’s on these are pretty visual in that usually a triac has blown its nut or a track lifted and burnt. That then gives a clue as to what component went belly up. 😉
- You must be logged in to reply to this topic.