beko wma1512w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › beko wma1512w

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 22, 2012 at 10:26 am #68034
    clockworkone
    Participant

    went to this one yesterday.door locked and nothing from there on.checked brushes and they completely worn out.ran a rinse program before i left and everything ok.cust now tells me that m/c takes about 20 min to begin after after pressing start(door locks straight away).also he says it is not heating now.brushes replaced by tilting m/c back so no removal of motor or connections.comm cleaned with comm stick.will obviously check heater on return.any ideas

    February 22, 2012 at 3:46 pm #369412
    bryan-206
    Participant

    beko wma1512w

    Possible air lock in pressure switch. But I’d say she’s pulling a fast one. If it started when you were there I can’t see why it doesn’t now.


    —
    I am here: http://maps.google.com/maps?ll=51.879021,-0.413041

    February 22, 2012 at 5:49 pm #369413
    jimca007
    Participant

    Re: beko wma1512w

    prob fixed by now but can air lock on the drain pump if the wee breather on the drain hose where it joins the pump is blocked.

    February 22, 2012 at 6:26 pm #369414
    clockworkone
    Participant

    Re: beko wma1512w

    thanks :tup: both of you for replies.i think it as you say has to be pr sw related.going back next week so will post outcome.paul

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.