Symphony ED10

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Symphony ED10

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • November 16, 2004 at 1:45 pm #6823
    tonyclifton
    Blocked

    Got a werid one

    need grill element for Symphony ED10 built in oven.
    its a 16 years old oven any ideas were to get one from

    Thanks Tony

    November 16, 2004 at 4:20 pm #119792
    Martin
    Participant

    Re: Symphony ED10

    Tony,

    I think it is an old Indesit/Ariston name they used? I suggest you measure the grill ele and get a pattern equivalent. Look towards the Indesit or Ariston types 😉

    Martin

    November 16, 2004 at 8:13 pm #119793
    tonyclifton
    Blocked

    Re: Symphony ED10

    cheers martin,
    already checked all indesit and ariston nothing matches at all and it has rounded ends that plug into a connecter block 😕

    November 17, 2004 at 10:10 am #119794
    Dave_Conway
    Participant

    Re: Symphony ED10

    Tony, have you got a digital camers ?

    If you have, take a photo and email it to me.

    Dave.

    November 17, 2004 at 5:56 pm #119795
    Dave_Conway
    Participant

    Re: Symphony ED10

    OK, I found a Philips one that should do it, even if it means removing the support bar and refitting it on the replacement.

    You reckon this will do the job ?

    It is a plug in one by the way.

    Dave.

    November 17, 2004 at 8:36 pm #119796
    tonyclifton
    Blocked

    Re: Symphony ED10

    cheers dave
    yeah its push in type but got no picture on my laptop off it for some reason and is it easy to remove support bar as this one seems to be solder on underneath

    November 17, 2004 at 11:13 pm #119797
    Dave_Conway
    Participant

    Re: Symphony ED10

    Now it works 😀

    Sorry about that, if it looks OK, it’s part number ELE4564 from Connect.

    Dave.

    November 19, 2004 at 8:53 pm #119798
    tonyclifton
    Blocked

    Re: Symphony ED10

    cheers dave ,
    got the part today and it fitted without much adjustment 😀
    custmor well happy as last engineer told them to write it off as parts not possible to get 8)

    November 19, 2004 at 10:01 pm #119799
    Dave_Conway
    Participant

    Re: Symphony ED10

    No worries Tony 😀

    Repair or replace ? Repair every time wherever possible 😉

    Dave.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.