zanussi ZDC46130W condenser drier dead

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi ZDC46130W condenser drier dead

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • March 6, 2012 at 8:28 pm #68303
    DOCTORDOOM
    Participant

    pnc 916094507/1
    Hi, I’ve got voltage to the machine and power down to door lock (with volt stick) no lights just completely dead. Anyone had this?

    March 6, 2012 at 9:10 pm #370521
    stevebunyan
    Participant

    zanussi ZDC46130W condenser drier dead

    Have you measured the voltage?


    Sent from Steves
    iPhone using Tapatalk

    March 7, 2012 at 10:23 am #370522
    DOCTORDOOM
    Participant

    Re: zanussi ZDC46130W condenser drier dead

    Yes…240 going through mains filter

    March 8, 2012 at 12:56 pm #370523
    stevebunyan
    Participant

    zanussi ZDC46130W condenser drier dead

    Is 240 coming out of door lock?


    Sent from Steves
    iPhone using Tapatalk

    March 8, 2012 at 1:31 pm #370524
    Criscold
    Participant

    Re: zanussi ZDC46130W condenser drier dead

    It appears that the neutral feed to the board comes via a toc on the heater on this machine. I will mail drawing to the address on the website

    Colin

    March 8, 2012 at 7:22 pm #370525
    DOCTORDOOM
    Participant

    Re: zanussi ZDC46130W condenser drier dead

    If you could send that drawing it would be appreciated thanks. I’ve changed my settings to receive email. I haven’t checked the voltage coming out door lock yet, I was hoping not to strip it all down just for a quote but it’s looking like i will have to give a ball park figure and do just that.

    March 8, 2012 at 7:27 pm #370526
    Criscold
    Participant

    Re: zanussi ZDC46130W condenser drier dead

    This should help You

    March 8, 2012 at 9:08 pm #370527
    DOCTORDOOM
    Participant

    Re: zanussi ZDC46130W condenser drier dead

    Great…thanks for your help

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.