Hoover OPH616/2-80 lifter needs replacing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover OPH616/2-80 lifter needs replacing

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 7, 2012 at 7:34 pm #68320
    alro
    Participant

    Hi gents ribs or lifter come off are they screwed in place or clip in place if screwed how do you get to at screws that hold them in as its a sealed tub assemble and the sump hose do not line up with screw head, just by looking or am i wrong
    cheers alro

    March 7, 2012 at 7:45 pm #370595
    Criscold
    Participant

    Re: Hoover OPH616/2-80 lifter needs replacing

    PM you email and I can send you some info

    Colin

    March 7, 2012 at 7:46 pm #370596
    admin
    Keymaster

    Re: Hoover OPH616/2-80 lifter needs replacing

    Hi

    Remove the sump hose and its a torn screw.then you will have to break one of the tabs when removing.

    bryan

    March 7, 2012 at 9:52 pm #370597
    suedehead1
    Participant

    Re: Hoover OPH616/2-80 lifter needs replacing

    i dont like to disagree but its the curved paddle and it just clips on.

    March 8, 2012 at 12:03 pm #370598
    loopey
    Participant

    Re: Hoover OPH616/2-80 lifter needs replacing

    suedehead1 wrote:i dont like to disagree but its the curved paddle and it just clips on.


    yes correct just done one lol

    phil

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.