Knobs for a whirlpool gas cooker

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Knobs for a whirlpool gas cooker

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 17, 2004 at 12:49 pm #6841
    admin
    Keymaster

    Hi

    I am looking for the knobs on a whirlpool gas cooker but do not have the model number. Is there anyone who could suggest a standard knob in the same way as one can get petrol caps?

    The cooker was supplied under the Magnet name and is white with 4 gas rings.

    Help much appreciated as slowly starving because we are not able to cook…..just a joke!

    Regards

    Jack

    November 17, 2004 at 1:03 pm #119865
    Martin
    Participant

    Re: Knobs for a whirlpool gas cooker

    Jack,

    Sadly there is no such thing as a ‘standard knob’ I’m afraid. They are all very different for the most part. The model number will almost certainly be on the ‘Rating Plate’ sited usually on the front door frame ❓

    Without that number we are stumped. However if you have an old knob as a sample, maybe a local spares supplier can supply something similar 😉

    Martin

    November 17, 2004 at 1:49 pm #119866
    Dave_Conway
    Participant

    Re: Knobs for a whirlpool gas cooker

    If it’s Magnet supplied it will be a seperate hob and oven.

    If it’s the hob knobs you need you’ll need to slide the oven out of it’s housing and get the model number from underneath the hob itself.

    Dave.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.