- This topic has 1 reply, 1 voice, and was last updated 14 years, 1 month ago by
.
-
Posts
-
I have an Electrolux ESL63010. It’s about 2 years old. We hadn’t used it for about 2 months as it is in a holiday home. Went to use it and it fills a little from the bottom then pumps out, then does this again. Then continues pumping for another minute or so then program ends, the end of program indicator lights and intermitent beeping starts but does not appear to stop until I switch off. The soap is not dispensed. I have tried switching to all the progams and the same thing still happens. I can see all of this as machine starts up with door still open! The whole cycle only takes a couple of minutes! I am thinking it is a PCB problem can anyone confirm this?
Re: Electrolux ESL63010 possible PCB problem
OK this may help someone else. I got to thinking, it was very odd that the machine could start up with the door open so I opened up the front door to access the PCB etc. I also looked at the catch/ door switch and found the problem! Part of the door catch/ switch mechanism had come off its pivot and although the door locked closed the micro switch was not being activated so the machine presumably was not going through any operational checks it may have, so was shutting down after puming out. I managed to get the switch reassembled correctly and it now works. Still think I may get a replacement switch to hopefully ensure I do not get a repeat of the fault. Luckily I did not yet get to buying a new PCB at £140 or so. Or a new machine as per the wifes instructions!
- You must be logged in to reply to this topic.