Bosch WAE24363GB/05 FD 8806601337 Dead Blank/No Display

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WAE24363GB/05 FD 8806601337 Dead Blank/No Display

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • March 19, 2012 at 1:59 pm #68504
    Bernie
    Participant

    Bosch WAE24363GB/05 FD 8806601337 Dead Blank/No Display
    I have got mains supply to PCB, meggered motor and heater there ok, had PCB out could not see anything obvious
    Is it then the PCB?
    Thanks
    Bernie

    March 19, 2012 at 3:37 pm #371350
    Bernie
    Participant

    Re: Bosch WAE24363GB/05 FD 8806601337 Dead Blank/No Displa

    I have found an old PCB without the display and have fitted it to see if it works and it does, so it is the board that has gone.
    Does anybody know what might have gone on these boards or suggest what I might try?
    Thanks Bernie

    March 20, 2012 at 1:01 pm #371351
    Martin
    Participant

    Re: Bosch WAE24363GB/05 FD 8806601337 Dead Blank/No Displa

    Bernie wrote:I have found an old PCB without the display and have fitted it to see if it works and it does

    I cannot figure what you’re on about here TBH. You’ve fitted an old board (WTF?) and it works….so what is the problem? 😕

    March 20, 2012 at 1:06 pm #371352
    leavemetogetonwithit
    Participant

    Re: Bosch WAE24363GB/05 FD 8806601337 Dead Blank/No Displa

    Can you post a photo of the duff board?
    Mike.

    March 21, 2012 at 10:12 am #371353
    Bernie
    Participant

    Re: Bosch WAE24363GB/05 FD 8806601337 Dead Blank/No Displa

    In reply to Martin’s question. The old board I fitted (complete with Panel-facia) was one without the LED display so different to the one on the machine.
    I only used it to see if it was the PCB.
    In reply to Mike’s question. How do you post a photo on here?
    Bernie

    March 21, 2012 at 1:12 pm #371354
    leavemetogetonwithit
    Participant

    Re: Bosch WAE24363GB/05 FD 8806601337 Dead Blank/No Displa

    Bernie wrote:
    In reply to Mike’s question. How do you post a photo on here?
    Bernie

    I use photobucket to host the pic but you can use any hosting site.
    This thread should explain all.
    http://www.ukwhitegoods.co.uk/forumsphpbb3/general-trade-forum/how-upload-picture-this-site-t59372.html
    Mike.

    March 21, 2012 at 3:34 pm #371355
    electrofix
    Moderator

    Re: Bosch WAE24363GB/05 FD 8806601337 Dead Blank/No Displa

    had a bosch a while ago dead panel

    there is a 10 ohm resistor in series with board supply and it goes open circuit. should have coloured bands on it brown black black

    Dave

    March 21, 2012 at 3:47 pm #371356
    leavemetogetonwithit
    Participant

    Re: Bosch WAE24363GB/05 FD 8806601337 Dead Blank/No Displa

    Wonder if that’s what’s referred to as a “fusible resistor”?
    http://docs-europe.electrocomponents.com/webdocs/0027/0900766b8002759f.pdf

    Mike.

    March 21, 2012 at 4:24 pm #371357
    electrofix
    Moderator

    Re: Bosch WAE24363GB/05 FD 8806601337 Dead Blank/No Displa

    leavemetogetonwithit wrote:Wonder if that’s what’s referred to as a “fusible resistor”?
    http://docs-europe.electrocomponents.com/webdocs/0027/0900766b8002759f.pdf

    Mike.


    very likely m8

    Dave

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.