indesit / hotpoint drum paddles

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indesit / hotpoint drum paddles

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 28, 2012 at 6:12 pm #68682
    slyp98
    Participant

    what does everyone use to keep the paddles stuck to the drum when the tang has broken off ?

    March 28, 2012 at 6:36 pm #372243
    BobHope
    Participant

    Re: indesit / hotpoint drum paddles

    there is an offical mod for this problem, pm me an email address and i will send some info.

    Bob.

    March 28, 2012 at 7:06 pm #372244
    iadom
    Moderator

    Re: indesit / hotpoint drum paddles

    Its not the fix that was supposed to cure the Mark 1 lifters from coming adrift.

    That involved drilling a small hole in the drum and fitting a rokut rivet, I tried that on several occasions with very limited success. 🙁

    Or is this one for the later Indesit type lifters.

    If its something new I would also like the info Bob if you can.

    TIA.

    Jim.

    March 28, 2012 at 7:08 pm #372245
    BobHope
    Participant

    Re: indesit / hotpoint drum paddles

    email address jim please.

    Bob.

    March 29, 2012 at 8:10 am #372246
    Rograbbit
    Participant

    Re: indesit / hotpoint drum paddles

    I had one of these last week so would be interested too if not too much trouble! 😀

    March 30, 2012 at 6:28 am #372247
    johnnyj
    Participant

    Re: indesit / hotpoint drum paddles

    If you fit the new lifters on the steps the lugs of the lifter, drill through with a small drill
    through the lifter and drum and then screw in a small stainless self tapper, i usualy do it on either side to provide a secure fit.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.