AEG Lavamat 16830 E10 Error – Drying

This has been partially covered on other posts, but I thought best to check my specific circumstances.

Approximately 2 months ago my washer dryer started exhibiting the classic symptoms of inflow valve problems. It was fine running one drying cycle at a time, but if a second consecutive cycle was required, the drum would rotate amost silently for a few minutes with no heat and then display the E10 error. Unfortunately due to being snowed under with work and a third child on the way, I didn’t have time to do anything, I just lived with the inconvenience.

Now the dryer has stopped functioning properly all the time, even the first drying cycle following a wash, which was previously fine. Once again the drum rotates for a few minutes, before the E10 error is displayed. There are no problems with wash cycles.

I have checked the inflow water hose and there are no issues and also the outside of the inflow valve, once again no obvious issues and no accumulated debris. This leads to me to suspect the inflow valve, but I would be grateful for confirmation. If this is the case a part number would be very helpful as the link in a previous reply is dead. As we have now got three under fives in residence, this is now a major priority as we have to clear at least one load per day rain or shine.

Many Thanks