TV630 Thermostat

Home › Forums › Public Support Forums › Spare Parts Help › TV630 Thermostat

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 22, 2004 at 11:11 pm #6885
    admin
    Keymaster

    Hi,

    I have a Hoover TV630 tumble dryer and it seems that the exhaust thermostat has gone on it. Any one know where I can get one and how much? The symptom is that the filtercare light is on all the time but bypassing the heater cutout thermostat has no effect… therefore I’m guessing its the exhaust thermostat thats gone…..

    Thanks!

    November 23, 2004 at 12:23 am #120116
    Penguin45
    Participant

    Alastair,
    The failure will almost certainly be the integral safety on the heater; not a practical DIY repair. You will require replacement element assembly p/no 04820075 – Dave will be able to advise price and availibility for you in the morning.

    Regards,
    Penguin45.

    November 23, 2004 at 8:22 am #120117
    Martin
    Participant

    Re: TV630 Thermostat

    Alistair,

    The thermostat you are looking for is located in the plastic round entry aperture to the drum. Accessible from the front it is Part No: 28382089. Cost about £10 and available via our “Shop@”

    Martin

    December 9, 2004 at 10:31 pm #120118
    Ed
    Participant

    Re: TV630 Thermostat

    I have a similar problem with the filter warning light coming on….

    the tumble dryer simply doesn’t heat up…. can someone advice on where to get the parts from?

    Alistair, what do you mean with the integral safety of the heater… is it the same as to what Martin refers to as the thermostart in the front of the drum?

    If so i have found this, can i bypass to see if the heater will heat up of will i need a stat there? if so where can i get one from?

    thanking you in advance…

    Ed

    December 9, 2004 at 11:06 pm #120119
    eastlmark
    Moderator

    Re: TV630 Thermostat

    We really wouldnt recommend bypassing anything, even for test purposes, unless you know what you are doing. Some of these are safety stats and are there for that reason.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.