- This topic has 10 replies, 2 voices, and was last updated 13 years, 12 months ago by
.
-
Posts
-
first time one of these couple year old , machine keeps filling , an try to stop or cancel . wont switch off have to unplugg an to stop water turn water supply off , am thinking pcb or could it be the fill valves help lads ?
Re: hoover washer optima oph714d
if the water valves switch off when you unplug the machine they are working ok.
have you done a full insulation check on the motor and heater ?, if they are ok i would presume its the selector switch or the pcb.
Does it show any fault code ?.bob
Re: hoover washer optima oph714d
didnt do insulation check / you had to turn water supply off to stop water . customer said showed e2 then e 4 the last time she tryed it and it flooded place ?
Re: hoover washer optima oph714d
both e02 and e04 relate to over filling problems, if the appliance is disconnected from the mains the valves should stop filling.
Bob.
Re: hoover washer optima oph714d
yeh it is over filling .is that more likely to be pcb or pressure switch ?cant understand why it wouldnt cancel and switched off tho ?
Re: hoover washer optima oph714d
i dont think a done that mate just turned water off , am sure customer told me she done that, unplugged it and it still kept filling she had to pull machine out ,and turn water off ?
Re: hoover washer optima oph714d
back to the basics, no power to fill valve it shuts off unless it it blocked open by debris in the valve,
fill valves normally fail safe.please insulation check the appliance after you have checked the fill valve operation is correct.
Bob.
Re: hoover washer optima oph714d
i no what your saying but i have had valves stay open with no power before ,
- You must be logged in to reply to this topic.