Siemens D/W stuck, no lights?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens D/W stuck, no lights?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 16, 2012 at 12:45 pm #68968
    iadom
    Moderator

    SE25M570GB /17
    Stuck on a wash cycle, alternating perfectly between upper/lower arms. Not overfilling.
    There are no lights on display at all and pressing the reset buttons has no effect. There was a steady( every half second) clicking/pulsing noise which I have traced to the aqua stop but it doesn’t appear to be letting any more water in. It will switch off via on/off button.

    Any suggestions ?

    Jim.

    April 16, 2012 at 4:07 pm #373303
    nomadPaul
    Participant

    Re: Siemens D/W stuck, no lights?

    When you say pressing reset does nothing , will it stop washing when you do reset it ? It should drain then……..maybe a blocked drain pump ?

    April 16, 2012 at 4:40 pm #373304
    iadom
    Moderator

    Re: Siemens D/W stuck, no lights?

    Pressing the two reset buttons has no effect at all, it just carries on washing away merrily with the aquastop firing/pulsing rapidly.
    Even unplugging has no effect, as soon as you press the start button it sets off washing again with a totally blank display. 🙁

    April 16, 2012 at 5:04 pm #373305
    Martin
    Participant

    Re: Siemens D/W stuck, no lights?

    PCB has definitely gone gaga I reckon. But the caution is that maybe the dispenser solenoid or the water point motor has caused it to go that way. 😕

    Have you inspected the PCB for likely damage Jim?

    April 16, 2012 at 5:38 pm #373306
    iadom
    Moderator

    Siemens D/W stuck, no lights?

    Not yet, was pushed for time and need to call back to her washer later in the week.


    Sent from my iPad using Tapatalk HD

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.