Hoover 31000269 – circuit/PCB diagramme

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover 31000269 – circuit/PCB diagramme

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 17, 2012 at 10:47 am #68993
    RocketMan
    Participant

    I don’t suppose anyone has access to a pcb diagram.

    Drain pump seal leaked causing a short blowing a transistor and the adjacent voltage controlled resistor.

    However the two components only have manufacturers numbers on them and I’m having trouble finding suitable replacement.

    Haven’t got a picture or component details to hand as the board is not here at the moment. The board is at an electronics engineer and he can’t readily identify the components but is going to try later…

    Don’t suppose anyone can help – a bit of a long shot I know.

    Thanks in advance

    April 17, 2012 at 2:45 pm #373385
    Martin
    Participant

    Re: Hoover 31000269 – circuit/PCB diagramme

    …..I wouldn’t mind betting is has bu$$ered up the microprocessor though. So don’t go to too much trouble with the PCB. 😉

    April 18, 2012 at 6:52 am #373386
    RocketMan
    Participant

    Re: Hoover 31000269 – circuit/PCB diagramme

    That thought had crossed my mind. What makes me think it might be ok is that the machine does everything apart from drain. Fills, washes and spins (if water removed manually) so hopefully should be ok. Thanks any way

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.