Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › siemens IQ 1430
- This topic has 9 replies, 5 voices, and was last updated 13 years, 11 months ago by
domesticbliss.
-
AuthorPosts
-
April 23, 2012 at 11:03 am #69084
domesticbliss
ParticipantHi, have searched through the forums but can`t find anything on this machine.
When it`s first turned on `siemens` slowly flashes in the display and will go no further….any ideas? checked the main board and connections and all looks ok….
Any help would be appreciated..
thanks
PaulApril 23, 2012 at 6:03 pm #373649Washman
ParticipantRe: siemens IQ 1430
Hi
What is this machine as siemans eshop does not recognise this number. Full Enr number would help.
Mike
April 23, 2012 at 10:07 pm #373650nomadPaul
ParticipantRe: siemens IQ 1430
It’ll be a WIQ
April 24, 2012 at 7:16 am #373651domesticbliss
ParticipantRe: siemens IQ 1430
Thats right Paul, a WIQ WIQ1430EU/01 to be precise
April 24, 2012 at 8:01 am #373652Martin
ParticipantRe: siemens IQ 1430
It may be showing the ‘Short Demo Cycle?’ Clearing it involves turning it on and off again (IIRC?) 😕
April 24, 2012 at 8:18 am #373653domesticbliss
ParticipantRe: siemens IQ 1430
Thanks Martin but I`ve turned it on and off SO many times now my fingers are numb.
Display says `siemens` which fades for 5 seconds then comes back on again.
Any ideas?April 24, 2012 at 9:58 am #373654don
ModeratorRe: siemens IQ 1430
The instruction manual is available to download from the Siemens site here the instruction manual link is towards the bottom of the page.
There are so many settings on this machine it’s almost like a command panel on a spacecraft :eeek:
Don
April 25, 2012 at 7:41 am #373655domesticbliss
ParticipantRe: siemens IQ 1430
Thanks for the link Dom but had the documents to hand. Lists many faults but not the one I have……
It`s almost like it`s not booting up..gets so far then resets itself.
Really pulling what little hair I have left out on this one…..
AAARRRGGHHHApril 25, 2012 at 7:58 am #373656Martin
ParticipantRe: siemens IQ 1430
And the Control Board retails at over £268….OUCH!!!
I wouldn’t wanna gamble on fitting one of those babies though it’s looking ever more likely that that is your problem. 😯
April 25, 2012 at 8:44 am #373657domesticbliss
ParticipantRe: siemens IQ 1430
Only paid £40 for it to recon, looking like it was a good buy….for spares. Pity really, I mostly deal with Miele but then this one came along….
Stick to what you know!
Thanks for your help Martin and all. -
AuthorPosts
- You must be logged in to reply to this topic.
