Bosch wft8010 washer dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch wft8010 washer dryer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 25, 2004 at 8:58 am #6911
    Lawrence
    Participant

    Hi
    I fitted a new tumble dryer element to this machine approx a month ago (dead short to earth ) now customer complains that 15 mins into cycle it trips ,
    on the premise forewarned is forearmed any clues before I go in to m/c
    Lawrence

    November 25, 2004 at 9:14 am #120288
    Penguin45
    Participant

    Fan motors seize on these Lawrence, bit pricey!

    Chris.

    November 27, 2004 at 2:25 am #120289
    APG
    Participant

    Re: Bosch wft8010 washer dryer

    Hi Guys

    WFT8030 is a gloryfied WFT7010
    Several mods had to be carried out.
    1. Turbo motor has changed to the one with duct/breather slots in the metal casing
    2. Tumble dryer thermostat which sits in top duct should be changed to a re-setable thermostat
    3. Rubber gasket must be fitted to inside of fasia to protect front display board against condensation build up

    The turbo motor assey is problematic and so is the triac behind the left suspension leg if looking at rear of machine.

    Hope this helps
    Andy G

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.