Ariston AWD12UK

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Ariston AWD12UK

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 25, 2004 at 4:17 pm #6918
    cornflakes
    Participant

    Problem with smoking moule – now very u/s indeed

    Model No AWD12UK
    Serial n/o 204123169

    require new control module been quoted from my supplier 2 to 5 weeks!!!

    part number i have been given is 2403359

    any one have on the shelf

    will please my client who does 4 washes per day..its the horses she says


    thanks for any help

    Graham
    (cornflakes)

    Kibworth

    Leicestershire

    November 25, 2004 at 4:32 pm #120301
    Martin
    Participant

    Re: Ariston AWD12UK

    Cornflakes,

    Looking up the model/serial number for you and the actual Part No comes up as C00093153 for a Module (less Eprom).

    Why don’t you contact EMW for advice on this? I bet the Motor is shot and blew the Module anyway ❓

    Martin

    November 26, 2004 at 9:15 am #120302
    cornflakes
    Participant

    Martin

    many thanks 2 points first and apoligise from not responding to your email, but i only returned from holiday last weekend. Yes a fiver a month seems very good value to me, as in the short time I have been using UKW, i have save that in labour cost with information received..so send me what ever I need and I will get you my subscription sent.

    right second point this Ariston.The fault on the PCB is an unsual one, as it was about to go up in flames, and the tracking on the board is most certainaly cause by high temp from 3 resistors.

    Call out was because drum was constantly filling up, so you first port of call is the pressure system..to add to the over fill the machine would not drain for more than 25secs, pump voltage dropped down to 29volts, programmer rotating clockwise indicating problems with drain pump.

    Whilst this is all happening over a 20 min period, a smell of burning was present, then smoke was rising at a fair rate from mod housing.

    so are we sure the motor has blown mod, or is it the high temp problem..

    Do I fit new mod and hope motor is OK?

    or will EMW have a more pin pointed reason for the problem. Or has anyone else had a similar problem.

    Their contact number would be appreciated.

    thanks for your time and help on this matter

    Graham

    November 26, 2004 at 9:20 am #120303
    AMS
    Participant

    Re: Ariston AWD12UK

    Graham,
    Number for EMW is 01623 647537 and ask for Tony.

    Good luck

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.