- This topic has 4 replies, 3 voices, and was last updated 13 years, 11 months ago by
.
-
Posts
-
Hi, I have a CTD00 P condenser dryer. When I switch it on I just get a buzzing noise, and then nothing when the button is released. I have taken the side panel off and the sound is coming from the part behind the dial.
Before this there was a buzzing from near the motor also. But this doesnt buzz anymore.
The appliance has the serial no. 608170748
Sorry if this has been posted before, I have had a look but cannot find this exact same problem.
Is there anything I can check/have a look at?
ThanksHotpoint CTD00 P Condenser Dryer Buzzing
Check the small plastic peg is still in place at the top of door .
Sent from my iPad using Tapatalk HD
Re: Hotpoint CTD00 P Condenser Dryer Buzzing
Yes, the peg is still there but I stuck a screwdriver in there and started the machine and no buzzing, the heater started up but still no spin. Does the motor kick in straight away? I cant remember.
I took the door switch off and had a look at how it works, I presume there is a cellunoid in the switch to push the pin down when the door is shut because it does not come down itself. Is this right?So thats the buzzing fixed now when I start the motor does nothing but if I give it a push start it works but of course when it stops and goes in reverse it needs a helping hand again.
Hotpoint CTD00 P Condenser Dryer Buzzing
You need to replace the capacitor then. 😉
Sent from my iPad using Tapatalk HD
- You must be logged in to reply to this topic.