Fisher & Paykal Dish Drawer Fault Code

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Fisher & Paykal Dish Drawer Fault Code

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • April 30, 2012 at 6:44 pm #69233
    TeeMyob
    Participant

    Hello,

    I replaced a heater plate and module today (both clearly blown).

    Now it just flashes on the outside middle button and the Rinse LED on the inside.

    Someone Kindly sent me some manuals, but I cannot find this fault code.

    It is a DD603IH, built in.

    Can anyone shed any light on the issue please?

    TM

    April 30, 2012 at 6:55 pm #374093
    johnmac11
    Participant

    Re: Fisher & Paykal Dish Drawer Fault Code

    Rinse light on is a F1 fault, water in the base of the machine.

    John

    April 30, 2012 at 7:53 pm #374094
    TeeMyob
    Participant

    Re: Fisher & Paykal Dish Drawer Fault Code

    But the bottom Drawer works?

    Regards,
    Trev.

    April 30, 2012 at 8:48 pm #374095
    johnmac11
    Participant

    Re: Fisher & Paykal Dish Drawer Fault Code

    check the top harness where it connects to mains filter board.
    What was the part numbers for the board and heater that you fitted?

    John

    April 30, 2012 at 9:10 pm #374096
    TeeMyob
    Participant

    Re: Fisher & Paykal Dish Drawer Fault Code

    johnmac11 wrote:check the top harness where it connects to mains filter board.
    What was the part numbers for the board and heater that you fitted?

    John

    Hello John

    Module = 528397EUP CTR PH3 2HR FAN SVC UK/EU
    Connect Description = Time display (Hours & minutes) (5045174828116)
    Heater = 528616 Kit Heater Plate PH3 230V ROHS
    Heater plate (5045175117264)

    Make any Sense?

    May 1, 2012 at 6:26 am #374097
    johnmac11
    Participant

    Re: Fisher & Paykal Dish Drawer Fault Code

    The parts are the right ones. Being paranoid about CDSL was the box for the module opened when you got it??

    Any easy way of checking if you have a faulty module is to swap the top and bottom modules to see if fault persists.

    John

    May 1, 2012 at 8:59 pm #374098
    TeeMyob
    Participant

    Re: Fisher & Paykal Dish Drawer Fault Code

    Thanks john, your help is very much appreciated.

    I have ordered another module. See what happens when I get back. I was going to swap the board whilst on-site. But had spent a lot of time trying to get it right and the customer was wanting to go out.

    Thanks once again.

    Hope I can return the favour some time.

    Trev.

    June 26, 2012 at 8:04 am #374099
    TeeMyob
    Participant

    Re: Fisher & Paykal Dish Drawer Fault Code

    Thanks for all your help.

    Spent hours trying to try and resolve this one. Ended up changing the module again, still not working. Also tried the module from the bottom drawer and no result. But then when the module was put back in the bottom drawer, a different error came on that drawer.

    So in the end it was binned.

    Just thought I would give an update.

    TM

    June 26, 2012 at 10:25 pm #374100
    jwd_73
    Participant

    Re: Fisher & Paykal Dish Drawer Fault Code

    sounded like a communication fault from board to board or a faulty mains filter board/burn out harness.

    July 7, 2012 at 8:51 am #374101
    TeeMyob
    Participant

    Re: Fisher & Paykal Dish Drawer Fault Code

    Morning Folks!

    I now have another one.

    Heater plate definitely blown – Replaced, top drawer still dead.
    Replaced front PCB – Still dead.

    Might bring this one into the workshop, see if we can get a solution.

    TM

    July 8, 2012 at 1:11 pm #374102
    johnmac11
    Participant

    Re: Fisher & Paykal Dish Drawer Fault Code

    It will probably be either the harness or mains filter

    John

    July 9, 2012 at 9:49 am #374103
    TeeMyob
    Participant

    Re: Fisher & Paykal Dish Drawer Fault Code

    Thanks once again John.

    I will let you know which one it is/was.

    TM

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.