Bosch Clasixx 1200 – continually filling with water

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Bosch Clasixx 1200 – continually filling with water

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • May 4, 2012 at 6:07 pm #69318
    rotis23
    Participant

    Hi,

    Our 2 year old Bosch Clasixx 1200 has started to continually fill with water via the softener tray! Even when no cycle is active or started it is filling. Drain works fine but it just fills up again!

    I can’t get the model number as I can’t open the door.

    We have high mains pressure around here so I wonder if a valve may be at fault. The PCB seems oblivious.

    Any help much appreciated!

    Cheers, Chris

    May 4, 2012 at 6:58 pm #374336
    Washman
    Participant

    Re: Bosch SPAM 1200 – continually filling with water

    Hi

    It needs a new water inlet valve, to stop it filling just turn the water tap off.

    Enr number required to help you any further.

    Washman

    May 4, 2012 at 7:18 pm #374337
    rotis23
    Participant

    Re: Bosch SPAM 1200 – continually filling with water

    Thanks Washman.

    Managed to get door open. Found a number (albeit on a sticker!)

    e – Nr. WAE24364GB/11 FD 8903 602275

    Where is best to order part/

    Cheers, Chris

    May 5, 2012 at 9:22 am #374338
    RocketMan
    Participant

    Re: Bosch SPAM 1200 – continually filling with water

    From the UKWG shop:

    http://shop.ukwhitegoods.co.uk/advanced … 0&x=22&y=2

    Power OFF if your’re going to delve in.

    May 5, 2012 at 11:16 am #374339
    rotis23
    Participant

    Re: Bosch SPAM 1200 – continually filling with water

    Thanks for that.

    That link comes up with two fill valves – neither have my model associated with them. Can someone confirm which one is good? I would rather buy from here given the help I’ve received.

    Thanks, Chris

    May 5, 2012 at 11:31 am #374340
    RocketMan
    Participant

    Re: Bosch SPAM 1200 – continually filling with water

    That’s definately the correct part number. It would be impossible to list ALL the machines it fits which why there is the option to email the shop to confirm the part. There is no need to as this IS the correct part. The top one is Genuine Bosch, the second one is Quality Pattern Part.

    If you’re not sure about partern parts think of it this way. If your car is not serviced by a dealer but a local garage – chances are it’s serviced with pattern parts.

    You pick and then buy it from the shop – Great service

    May 5, 2012 at 5:45 pm #374341
    rotis23
    Participant

    Re: Bosch SPAM 1200 – continually filling with water

    Thanks – sold.

    May 12, 2012 at 3:54 pm #374342
    rotis23
    Participant

    Re: Bosch SPAM 1200 – continually filling with water

    Hi All,

    I’ve replaced the filler valve (magnetic-valve) but still the same problem. Just continually fills whether program set or not.

    Any ideas appreciated.

    Thanks, Chris

    May 12, 2012 at 4:48 pm #374343
    Martin
    Participant

    Bosch SPAM 1200 – continually filling with water

    rotis23 wrote:Any ideas appreciated.

    Main circuit board at fault by the sound of it. If the machine fills with the power to the machine switched on it’s the board. If the machine fills with no power on it’s the valve.

    May 12, 2012 at 5:03 pm #374344
    rotis23
    Participant

    Re: Bosch SPAM 1200 – continually filling with water

    Bugger. Is it worth replacing? Should I rule anything else out before replacing pcb or buying new?

    Thanks for help so far.

    May 12, 2012 at 6:23 pm #374345
    Martin
    Participant

    Bosch SPAM 1200 – continually filling with water

    rotis23 wrote:Bugger. Is it worth replacing?

    I’ll let you decide. The part costs £95 and is available at Bosch’s eShop (part no: 668828) http://www.bosch-home.co.uk/store/spareparts/search

    May 15, 2012 at 9:30 pm #374346
    rotis23
    Participant

    Re: Bosch SPAM 1200 – continually filling with water

    Well it was the board 😕 looks like an inductor in the middle of the board had blown.

    Anyway, thanks again for all your help – amazing forum! 8)

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.