- This topic has 5 replies, 4 voices, and was last updated 13 years, 11 months ago by
.
-
Posts
-
First one of the Chinese heaps I have seen, PNC.914579820-00
Customer says it will not spin, even when empty, says it will tumble and count down to 6 or 7 minutes then stop tumbling and timer goes back a minute or two.
As usual when I tried it it went into spin abd counted right down perfectly.
I don’t know how to get into diagnostics on these ( if anyone who has access to Pro Corner could help me out I would be most grateful ).
I did try a few combinations of button presses and knob turning and at one stage got what looked like L5t in the display, no idea if this is an error message or not. 😕Any ideas welcome.
TIA.
Jim.
Re: Zanussi ZWG1140M no spin.
iadom wrote:
I don’t know how to get into diagnostics on these ( if anyone who has access to Pro Corner could help me out I would be most grateful ).
Jim.
You only had to ask :clown:
Rather large file winging it’s way to you at zen.co.ukDon
Re: Zanussi ZWG1140M no spin.
Thanks for that Don, not really sure I want to get my hands inside any more Chinese stuff, the Hotpoint/Indesit dishwashers are bad enough. 🙁
Jim.
EDIT. Having had a quick look I’m not sure I really want the tech info. :eeek:
It is losing quite a lot in translation. 😥
Might pop into my local Chinese take away and see if they can make any sense of it. 😀
Like this gem for starters, ‘The drain hose is obdurate with the cloacae’ now what on earth does that mean?????
Re: Zanussi ZWG1140M no spin.
Hey Jim: Try a couple of pints & a Special Chow Mein, at least if you can’t translate the manual you can enjoy trying Lol.
AndyRe: Zanussi ZWG1140M no spin.
I’ve had a couple doing that, Jim i’ve cleared the filter and removed the pressure hose from the linear pressure switch and refitted, not had a call back so far about 2 months now fingers and toes are still crossed.
- You must be logged in to reply to this topic.