- This topic has 2 replies, 2 voices, and was last updated 13 years, 11 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Need to dismantle to change the twin grill regulator, I cant see any obvious screws ect..as anyone got a diagram as to were access screw are located. please John
Re: New World 444445004 (range cooker)
Not entirely sure of this specific model but on most GD ranges, there are screws holding plastic piece to both sides of fascia, this allows fascia panel to be pulled forward, knobs off 1st of course. Some also have screws under fascia, accessed by opening top oven doors & looking upwards, if its dual fuel the hob top may need to be removed, screws on inner lip behind fascia & at back of hob top, screws around burners need to be removed & complete hob will have to be taken off.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.