- This topic has 7 replies, 3 voices, and was last updated 13 years, 11 months ago by
.
-
Posts
-
bosch shv55m03/gb lower level spinner not flowing with water. upper spinner appears normal. piping to both levels unobstructed. any clues, please?
bosch shv55m03
danwinterland wrote:any clues, please?
Oh yes, the ‘instantaneous heater unit’ will need replacing.
Re: bosch shv55m03
martin
thanks for quick reply – my mistake the heater appears ops norm – I’d been testing on a cycle that didn’t heat. I’m getting a good flow of water from the upper spinner, none in lower
bosch shv55m03
Nevertheless the fault is with the instantaneous water heater. The water diverter valve that’s causing you the problem is an integral part of that heater unit and thus requires replacing to cure.:(
Re: bosch shv55m03
This one Martin:
http://shop.ukwhitegoods.co.uk/Dishwash … ement.html
Sorry, your knowledge of Bosch is better than mine and that dishwasher uses a heat exchanger as well and I’m curious.
K.
Re: bosch shv55m03
kwatt wrote:Sorry, your knowledge of Bosch is better than mine and that dishwasher uses a heat exchanger as well and I’m curious.
Firstly, this model has two different heater units (488856 OR 498623) therefore before ordering it is necessary to establish the suffix of the Enr number.(i.e the last two numerals after the /)
Secondly, no, this model range does not have a heater exchanger matrix.
HTH? 😀
- You must be logged in to reply to this topic.