Whirlpool AWD/R 4205 Check Water Check Filter Lights on

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWD/R 4205 Check Water Check Filter Lights on

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 19, 2012 at 8:52 am #69549
    Taff
    Participant

    Customer complained of the machine stopping mid cycle with both the Check Water Check Filter Lights on. I checked the filter and stripped the pump looking for blockages all clear, no coins stuck in the drain hose. The machine fills on all cycles and there is no problem with the draining. I Googled this fault and it appears to be quite a common fault. Is this a fault code? The motor brushes, element, and pressure sw all check out ok. Both water valves operate ok and both the inlet filters are clear. Hoses are not kinked.

    Any ideas before the board is replaced?

    Regards

    Taff

    May 19, 2012 at 11:24 am #375188
    johnmac11
    Participant

    Re: Whirlpool AWD/R 4205 Check Water Check Filter Lights on

    Hi Taff,

    Send me a PM with your email address and I will send you some info.

    Is the model number supposed to be AWOR4205?
    let me know the 12nc to be sure I send the correct info.

    John

    May 19, 2012 at 11:40 am #375189
    johnnyj
    Participant

    Re: Whirlpool AWD/R 4205 Check Water Check Filter Lights on

    What about a plockage in the pressure hose

    May 20, 2012 at 7:21 am #375190
    Taff
    Participant

    Re: Whirlpool AWD/R 4205 Check Water Check Filter Lights on

    Model is definatly AWD/R 4205

    May 20, 2012 at 8:36 am #375191
    johnmac11
    Participant

    Re: Whirlpool AWD/R 4205 Check Water Check Filter Lights on

    I cannot find that model number but as I said there is a AWOR4205 which has about 6 variants, post up the 12nc number to be sure of getting the right info.

    John

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.