- This topic has 5 replies, 4 voices, and was last updated 13 years, 10 months ago by
.
-
Posts
-
Had a snapped handle which i replaced. At same time took the electric doorlock out, gave it a cleanup and replaced in shell. Ran a wash and operated fine. Door released correctly. Ran a second wash and cycle stopped 20 minutes in with door lock (De) error. Door opens and shuts fine but wash now wont start due to ‘De’ showing.
Should i be looking at replacing the electric lock as well please? UK WHitegoods suggested i post on here for suggestions before ordering.Re: LG washing machine door lock help
Check that the plug hasn’t come off the lock as they have a habit of coming adrift.
Re: LG washing machine door lock help
Plug was nice and secure but thanks for the suggestion.
So i bought the part, replaced the other one, and its STILL showing door error. Ive turned the mains off, left it 5 minutes, left it overnight, refitted both parts again but still getting “De”.ANy further help out there please?????
Dont want to sit in a laundrette for 3 hours while the baby’s 2 dozen outfits do their thing!
Thanks in advance, AlexRe: LG washing machine door lock help
There’s a checklist on the fault codes for LG washing machines here…
http://www.ukwhitegoods.co.uk/help/fix- … codes.html
Sometimes the board can be fried due to it. 🙁
K.
Re: LG washing machine door lock help
ru sure you have fitted the door handle correctly.if you slide the door switch over itself then switch and it works door handle faulty if still bleeps de then pcb goosed
Re: LG washing machine door lock help
Thanks for help. Both parts fitted correctly and working but still coming up “de”. Noticed some blacking of the contacts on the electric block that attaches to the door catch though. Would that relate to a pcb issue? Are they worth doing or is it time for a new washer?
- You must be logged in to reply to this topic.