IKEA DWF B10 7 Flashes

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › IKEA DWF B10 7 Flashes

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 29, 2012 at 11:14 pm #69712
    spoonhead
    Participant

    Hi, I’ve been reading the forums and it seems that 7 flashes suggests a flow meter issue. I’ve had the dishwasher out, checked and cleaned the circuit board and connections and tried to run a cycle but the same thing happens.

    So I’ve looked into buying a new flow meter. I’ve been quoted a price of £48.72 for a new tank and a whopping £145.05 for a printed circuit board! Cant believe it, it’s a tiny thing with just a couple of components on it! Not to mention that I could almost buy a new dishwasher for this price!

    I have a couple of questions. Firstly, are these prices reasonable? Seem like daft prices to me! Secondly, is there anything else I can check before I make any decisions about paying for a new circuit board? Is there anything else that could be causing the problem? Inspection of the printed circuit board showed that it was clean, no corrosion and the ‘fuse’ type component seemed fully intact.

    Any help appreciated, thanks.

    May 30, 2012 at 4:59 am #375750
    johnmac11
    Participant

    Re: IKEA DWF B10 7 Flashes

    The flow meter circuit board is part of the fill chamber and can be bought from the shop here http://shop.ukwhitegoods.co.uk/Dishwash … amber.html

    The circuit board is not available as a spare part on its own so I assume that the price you have got is for the main control board for the appliance.

    John

    May 30, 2012 at 11:34 pm #375751
    spoonhead
    Participant

    Re: IKEA DWF B10 7 Flashes

    Thanks for the reply. Is there any other things I should check before I commit to buy new parts or choose to buy a new washer?

    May 31, 2012 at 7:03 am #375752
    bryan-206
    Participant

    IKEA DWF B10 7 Flashes

    Does the appliance actually take water ?


    —
    I am here: http://tapatalk.com/map.php?m0lvl2
    Life’s a bitch ain’t it!

    May 31, 2012 at 6:57 pm #375753
    spoonhead
    Participant

    Re: IKEA DWF B10 7 Flashes

    I don’t think so. None comes into the machine when I run it with the door open. It sounds like it’s working when you start a cycle but it stops after perhaps 45 seconds, bleeps, and the light flashes for 7 seconds.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.