- This topic has 10 replies, 4 voices, and was last updated 13 years, 10 months ago by
.
-
Posts
-
If prog selected with door open door switch clicks repeatedly.
When door shut,whatever prog is selected goes straight into drain,without pressing start! End light flashes continuously.
Seems to be in some sort of abort mode??Zanussi FX1465W Washing machine.Aborts from start.
Latham63 wrote:Seems to be in some sort of abort mode??
….or a duff Interlock?
Re: Zanussi FX1465W Washing machine.Aborts from start.
Latham63 wrote:Is there a test procedure I can use?
Sure there is, this model has the standard EMW1000 board in it. Diagnostics and error codes shown HERE ON PAGE 3. 😀
Though I suspect because of the problems you’ve encountered with it so far you might not be able to get it to perform the diagnostics procedure.
Another quick thought I have that may be relevant….it’s not unknown for the PCB’s mounting lugs to get damaged by hand-fisted operators pressing the Start button too hard. The overall effect not dissimilar to you what are experiencing with it right now. So I would suggest taking a close look at that and take a new Interlock along for the ride. 8) 😉
Re: Zanussi FX1465W Washing machine.Aborts from start.
Tried suggestions,still no go! Only there are now 3 beeps/flashes then pause,repeating…does this mean something?
Pcb looks ok? Door interlock replaced,no change.Zanussi FX1465W Washing machine.Aborts from start.
Latham63 wrote: there are now 3 beeps/flashes then pause,repeating…does this mean something?
Sure it does………an E3? series fault if I’m any judge? 😀
Re: Zanussi FX1465W Washing machine.Aborts from start.
check out the pressure switch, if there is 2 its usually the black small one it works using frequecy so dont blow through it but check connections and give it a gentle tap, if not try a new one.
Re: Zanussi FX1465W Washing machine.Aborts from start.
Ok will return once more with pressure switch treatment.Fingers crossed! Thanks again.
- You must be logged in to reply to this topic.