Miele W304 seems to be stuck on LED function test

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele W304 seems to be stuck on LED function test

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 7, 2012 at 3:46 pm #69830
    chitts
    Participant

    When this machine is switched on initially the start LED flashes twice rapidly, then pauses, then repeats. If selector is set to any cycle the machine goes into LED check repeats continuously. I’ve made sure none of buttons are stuck in.I’ve never seen this on a Miele before. Any clues?

    June 7, 2012 at 7:57 pm #376127
    Seamy
    Participant

    Re: Miele W304 seems to be stuck on LED function test

    When you turn it off with on/off button & turn knob to finish does it go down to finish l.e.d? Sounds like you have gone into either programming or service mode.

    June 8, 2012 at 4:38 am #376128
    chitts
    Participant

    Re: Miele W304 seems to be stuck on LED function test

    I’ve tried both programming and service mode. There is no control over what happens, I think the electronic has failed! I just wondered if anyone had seen this happen before.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.