Brandt WFH1261W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Brandt WFH1261W

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • December 1, 2004 at 8:04 pm #6993
    Penguin45
    Participant

    Will some kind soul please advise p/no./price/availability for the control board on this washer? The current one has reduced itself to a large lump of charcoal………..

    S/no is 0020601902 – 137110446

    Thanks,
    Chris.

    December 1, 2004 at 8:40 pm #120804
    kwatt
    Keymaster

    At last! I can help Penguin! 😆

    Thanks, the tech ref. No. made that an easy one. 😉

    The control card is 55X7766 price code L6 and is not in stock with no ETA on it, the price should be about the £80ish mark but that’s a guess from memory.

    It only shows the one card behind the facia split in two, but it comes as one unit.

    K.

    December 1, 2004 at 9:16 pm #120805
    Penguin45
    Participant

    Thanks Ken, I’ll chase that up in the morning.

    Chris.

    December 1, 2004 at 10:20 pm #120806
    eastlmark
    Moderator

    Re: Brandt WFH1261W

    Chris, i have one if you are desperado, I will have to check the price on Friday (rare day off Thursday), I have a feeling its a bit more than K just quoted…..PM me if interested.

    December 2, 2004 at 10:35 am #120807
    eastlmark
    Moderator

    Re: Brandt WFH1261W

    Quick update on this, the one I have is p/n: 52X0893 but it is for a WFH1261 and the price code is N5. Not sure if it is the right one after all.
    Mark

    December 2, 2004 at 7:03 pm #120808
    Penguin45
    Participant

    Cheers for all the responses – if there is any confusion over this, it’s the board in the white plastic box mounted flat, in the top front left hand corner of the machine.

    Ta,
    Chris.

    December 4, 2004 at 9:31 pm #120809
    Penguin45
    Participant

    Er, so which one should I order (or blag off Mark!)?

    Chris.

    December 5, 2004 at 8:58 pm #120810
    kwatt
    Keymaster

    Given the serial number P, the one I gave you is definately correct.

    K.

    December 5, 2004 at 9:47 pm #120811
    Dave_Conway
    Participant

    Re: Brandt WFH1261W

    Is this one of those double shaft timer/pcb things ?

    I’ve got one as well but I have no idea of the part numer as it was ordered and booked to an Ocean machine over a year ago but it was the wrong one,the machine was replaced as Brandt couldn’t get the part numer 😕

    Any numbers on the unit Chris ? I’ll check the one I have as well.

    The part numer Ken has given is out of stock so the liklehood of getting one are slim, but then Brandt’s spares system is a little innacurate shall we say 😉

    Dave.

    December 6, 2004 at 9:05 am #120812
    eastlmark
    Moderator

    Re: Brandt WFH1261W

    Not its not Dave, its just a pcb board with no knob shafts, the one I have is marked on a yellow label on the case: New Part number, ET91224210, software version: 2421000

    I guess it may be better to go with Kens number unless someone can prove it is a supersession. By the way you would have to do a lot of Blagging Chris as this one was billed to me at £124.84

    December 6, 2004 at 9:19 am #120813
    Dave_Conway
    Participant

    Re: Brandt WFH1261W

    eastlmark wrote:I guess it may be better to go with Kens number unless someone can prove it is a supersession.

    Email sent to Brandt spares asking 😉

    Dave.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.