Siemens dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens dryer

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 17, 2012 at 6:52 pm #69997
    raw
    Blocked

    siemens dryer WT66080GB/02
    put it on extra dry, time in window display starts at 137, 136,135 then goes to zero and dryer stops wont do anything,is this gonna be board fault

    June 18, 2012 at 6:14 am #376693
    nomadPaul
    Participant

    Re: Siemens dryer

    Are you testing it with a wet load in it ? if yes , then I’d be checking the temp limiter first. if no , try it loaded ! unlikely to be a board fault .

    June 18, 2012 at 7:54 am #376694
    raw
    Blocked

    Re: Siemens dryer

    it was tested empty

    June 18, 2012 at 3:46 pm #376695
    nomadPaul
    Participant

    Re: Siemens dryer

    Its a sensor dryer so no load = no operation after 2/3 mins . It needs a wet load in it to test properly and then see what indications it gives if it fails then.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.