Zanussi ZWG1140M

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWG1140M

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 18, 2012 at 3:23 pm #70009
    timdowning
    Participant

    914579820/00

    E62 on this machine. And motor going straight into spin when spin only cycle selected. Looks like a Vestel machine?

    Magnet looks fine and tacho coil is 48 ohms, is that right?

    Am I looking at just a board fault on this? assuming the coil reading is about right.

    Thanks.

    June 18, 2012 at 6:52 pm #376734
    Hollytree_Technical
    Participant

    Re: Zanussi ZWG1140M

    E62 is overheat on wash so I would be looking at the NTC for that, what is the insulation reading?

    Jem

    June 21, 2012 at 5:27 pm #376735
    phooey69
    Participant

    Re: Zanussi ZWG1140M

    Lux engineers would always change board and motor to clear this fault

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.