Beko Washing Machines – Intermittent lack of Spin

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko Washing Machines – Intermittent lack of Spin

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 26, 2012 at 8:01 am #70143
    TeeMyob
    Participant

    Hello,

    Seem to be getting quite a few Beko’s where customers are complaining of lack of spin.

    Various models. Some have been faulty pumps. Some I have changed the module. But have one or two that keep bouncing back.

    Could anyone shed any light on it for me please?

    TM

    June 26, 2012 at 6:54 pm #377186
    Seamy
    Participant

    Re: Beko Washing Machines – Intermittent lack of Spin

    Many lack of spins are because of out of balance. Check fault code to confirm last error. Armature with too much carbon on it can cause no motor action, as can bad brush contact. Looms connections to P.C.B & motor should all be checked for good connection. Motor not being able to turn on first wash rotation can lead to overheated segment of armature symtoms you describe.

    June 26, 2012 at 9:53 pm #377187
    TeeMyob
    Participant

    Re: Beko Washing Machines – Intermittent lack of Spin

    Thanks Seamy,

    I have narrowed a few down to Out-Of-Balance spin, many customers do not accept this. Despite me finding it over or under loaded.

    Will look at your other solutions.

    Again, thank you.

    TM

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.