Bosch WTE84104GB/17 FD 8909

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WTE84104GB/17 FD 8909

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 28, 2012 at 12:14 pm #70188
    mike412
    Participant

    Hi Folks.

    Anyone seen this fault before?.

    T/Dryer runs ok then switches off early in cycle. all LEDs off, start button flashing as if there has been a power cut. Only thing “different” is that when switching back on, the “start” button beeps twice.

    This is one of a pair of similar Bosch Dryers in a nursing home.
    If I swap the 13amp plugs over the other dryer works quite happily and i still get the same symptoms on this one. ie Mains seems sound.

    All contributions greatfully received.

    regards,

    Mike.

    June 28, 2012 at 12:49 pm #377324
    DDDave
    Participant

    Re: Bosch WTE84104GB/17 FD 8909

    I had this problem before but I dont know if it is the same model. The transformer on the board was cutting out causing the machine to stop mid cycle. It gave the same effect as a power cut.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.