tricity bendix biw105w 5 flashes.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › tricity bendix biw105w 5 flashes.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 20, 2012 at 7:24 pm #70579
    keithwilliams
    Participant

    basically whatever cycle you select, the end light flashes 5 times never repeated and sits there dead.cant access the diagnostics. have tried new lock=no change
    have meggered heater= ok
    checked board for damage/loose wires etc= appears ok
    motor carbons are as new. (this machine is in holiday cottage very very little use)
    it has ceset motor on so tacho shouldnt be an issue.
    any advice appreciated
    thanks

    July 20, 2012 at 10:14 pm #378436
    Hollytree_Technical
    Participant

    Re: tricity bendix biw105w 5 flashes.

    Have you meggered the motor? I have seen a few with the armature short to earth, could always try powering it up with the motor disconnected as well.

    July 22, 2012 at 6:10 am #378437
    keithwilliams
    Participant

    Re: tricity bendix biw105w 5 flashes.

    Thanks for reply. I havr since fitted a known hood motor and also disconnected motor.
    So still a head scratcher!

    July 22, 2012 at 3:05 pm #378438
    QUICK FIX
    Participant

    Re: tricity bendix biw105w 5 flashes.

    had once a weird fault on a 105 and it was a burnt connection at pswitch just a thought prob more the pcb is goosed

    July 22, 2012 at 4:36 pm #378439
    keithwilliams
    Participant

    Re: tricity bendix biw105w 5 flashes.

    happy days!!!!
    bit bored today so decided to rob a motor triac from a board and solder it in.
    yes that did the trick.
    full wash cycle done and passed diagnostics with no faults indicated.
    one to remember.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.