- This topic has 1 reply, 2 voices, and was last updated 13 years, 7 months ago by
.
-
Posts
-
I am hoping someone can assist on this one.
Its in a tenanted property and the tenant is complaining about smells from the tub.
I have been down the “Service Wash” route but we are back to square 1.
I am beginning to suspect that the Thermistor may have changed value and the machine is not heating to 90deg to achieve the sterilisation effect. I would like to test the thermistor but I dont have any information on what normal at ambient is.
I would be most grateful if someone could assist with this information.
Regards,
Mike.
Re: Whirlpool AWG349/3 Washer Dryer
You must be desperate if you’re having to grasp at such a straw. Not sure how modern your model is but I’d have thought it would give an error code if the ntc went wildly out. What else have you tried? I’d be looking at the drainage arrangement to see if dirty water is syphoning back from the sink waste for example.
Mike.
- You must be logged in to reply to this topic.