bosch HME9760GB/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bosch HME9760GB/01

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 15, 2012 at 1:43 pm #70961
    rickard
    Participant

    I got called to this microwave oven where the customer opened the door and it went bang, i looked at the bulb which had blown and had also blown the power board, i replaced the power board at a great cost but now when you plug the oven in it shows up E5 for a couple of seconds and then the display goes blank, i have read that E5 means pcb electronic failure but i have replaced the power board, does this mean that one of the other boards are faulty or have i got to programme the board, any help is appriciated as i have spent a lot on this oven and need to get it working
    Thanks Andy

    August 15, 2012 at 2:39 pm #379471
    SWERV
    Participant

    Re: bosch HME9760GB/01

    Those boards do not need programming, it will probably need one of the display boards, just not sure which one.Sorry, I can’t tell you what E5 means.
    Merv

    August 18, 2012 at 2:46 pm #379472
    rickard
    Participant

    Re: bosch HME9760GB/01

    each board is over £100 so any help would be great. thanks andy

    October 4, 2012 at 12:36 pm #379473
    rickard
    Participant

    Re: bosch HME9760GB/01

    customer is chasing me for the repair does anyone what E5 flashing up on the screen means when you plug it in and then goes dead.
    Thanks
    Andy

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.